ACC BIKE
Sort by
Show result

- Higher Flexibility.
The trainer use indoor, so we can train anytime in any weather, use the trainer can help you control the intensity of training, make the train useful.


-Better Pre match warm-up Equipment.
Before the match, especially like climbing and time match, trainer can make the body warm up and relax, reach a better state. And after match, use the trainer can do the cooling training, to relieve fatigue.


-Convenience and Generality.
The trainer's weight is only 6.2kg, and can fold in three-section, make the volume very small, can easy put in storage room or the trunk of the car. You even can take it to any place you like to ride, and this trainer can regulate the distance between rollers, so make every style bike can ride on it.


- Better Riding Experience.
The roller trainer rely on the rider to control the balance, so simulate a riding environment like ride on the road


- Better Material
The roller trainer made by high strength Aluminium alloy, every link use stainless steel screw, control the product's weight and improve the strength and durability.


-Higher Cost Performance
Our roller trainer can fit in any style of bike, and this product use by the professional athletes in half a year to do the training, no any quality problem, and compare the similar products like made in Japan, Italy and Netherland, our price is less than 50% of their price.


The way to get on/off the bike.

-Get on the bike: left leg step on the footboard, right leg cross the bike step on another side of footboard, sit on cushion( Rookie better to put the cushion lower), then start ride, image ride on the road, and keep relax.

- Get off the bike: No brake, stop ride, and waiting the wheel became slow or stop, put one leg step on the floor or footboard.

RM380.00
RM480.00

> AN ESSENTIAL CLEANING PRODUCT SPECIALLY FOR MULATED FOR MOTORCYCLE & BICYCLE
>WATER BASED MIXTURE
>ECO-FRIENDLY & EASY TO USE
>CONTAINE NO PETROLEUM DISTILLATES,ACIDS OR SILICONES AND WILL NOT HARM PAINTED SURFACE IT USE AD DIRECTED
>NOTE : DO NOT SOAK BIKE PARTS IN BIKE CLEANER FOR EXTENDED OF TIME AS DAMAGE MAY RESULT

METHOD: CAN DIRECT APPLY THE SOLUTION TO THE CHAIN WITH BRUSH

1L

 

RM65.00

1.Product Specification

Product Name:Navi800 Smart Front Light Oimensions :L:105mm W:31mm O:34mm Operation Mode: Ruto/Manual Battery: 3350mah rechargeable Lithium-ion bettery Weighe:139g(including mounting bracket) Run Time: 8.4hrs@200Lm 1.5hrs@800Lm Color: Black Waterproof:Ipx6

2.Accessories Navi800/Battey/USB Cable /Handlebar Bracket Mounting/ Gropro Mount Bracket

3.Operation and functionality Navi800 comes with a motion sensor which allow the light to detect if the user is moving the bike and truning on/off the light automatically Key Function Operation Function Single click Change the output power or turn on the light Oouble Click Switch betweenAuto moda and manual made Press down>1s Switch off Note:When operation in Auto-mode the light will be turn on again if motion is detected Auto/Manual mode The navi800 supports two operation modes which can be changed between the two modes by double tclicks he button

4.Change the batery Chanrge the battery Remove the rubber seal 1 on the button of Navi800 and charge the battery via the USB connector.,Battery will be fully charge in2-3 hours.Charge indicator will turn red when charging is in progress and will turn gree when charge completed. Replace the battery The battery can be remove/replace by turning the cartridge clockwise or anti-clockwise as below:

5.Installation Handlebar mount: Mount the handlebar bracket to the handlebar and slide in the Navi800. Cycle Computer Mount(GroPro Adaptor Inseall the GroPro adaptor to a standard cycle computer bracket (with GpoPro pount),and slide in the Navi800.Make sure keep the button on the top. 6.Warranty The tail light is covered by a one year warranty.

RM159.00

Features:

-Aluminium alloy CNC machined, Schrader/Presta valve compatible

-Dual action stroke, bigger air flow and more efficient

-Max pressure:110psi

806: Length: 196mm, Weight: 85.5g

906: Length 196mm, Weight: 102g

RM49.90

Welcome to monton malaysia where we strive to provide our customers an array of products that satisfy demand for quality and efficiency. Buy our products  in a worry-free manner as we guarantee 100% authenticity. Shopping can't get any easier than this, so start today!

- Unibody design at tail: this design is fashionable to decrease the wind resistance on bike riding.

1. Cool and comfortable upgraded helmet stripes

2. Folding sewing on the end of the helmet stripes to make it durable 3. Fashionable design

RM120.00

Welcome to monton malaysia where we strive to provide our customers an array of products that satisfy demand for quality and efficiency. Buy our products  in a worry-free manner as we guarantee 100% authenticity. Shopping can't get any easier than this, so start today!

- Unibody design at tail: this design is fashionable to decrease the wind resistance on bike riding.

1. Cool and comfortable upgraded helmet stripes

2. Folding sewing on the end of the helmet stripes to make it durable 3. Fashionable design

RM120.00

Features
• Dual core electric wires with Di2 technology
• Plug-and-play wire for Shimano's e-Tube Di2 electric-shifting systems
• All e-Tube wires may be used for internal or external applications
• Available in a variety of different lengths to suit bike-specific needs
• Prevents depreciating factors such as contaminates, corrosion & stretching
• Reliable and secure fitting ensured
• Water-resistant connectors at each end
• Length: 600mm

RM135.00

This is the Shimano Ultegra Di2 Internal Junction Box. This box is referred to as the junction box "B" on a Di2 build. The SM-JC41 is for use with internal wiring setups and is the main center of e-tube Di2 systems. For external wiring setups see the SM-JC40.

  • Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear deailleur, cockpit junction box and battery mount
  • Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/
  • All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
RM185.00

PRO crank protection | Crank boot for Shimano E8050 | M8050 | M8000 crank

The cranks of e-bikes in particular are often exposed to bumps and shocks due to their lower center of gravity. The PRO Crankboots provide a remedy and reliably protect your crank arms from damage. Their robust material and the one-piece design make the Crankboots extremely resistant. Their shape is optimized for Shimano E8050, M8050 and M8000 cranks , but can also be used for various other crank arms.


Technical specifications:

Material: plastic (TPR)
Compatibility: universal fit; optimized for Shimano E8050 | M8050 | M8000 crank
Color: Black

RM69.00